Power Integral

kinkelder-hss-power-integral_productlarge

Stable solution for thin wall tube cutting

The thick body and thinned cutting area of the Power Integral saw blade provide a low friction coefficient and reduced cutting resistance combined with higher strength. This enables these saw blades to be used for extremely demanding applications, like fast cutting of thin walled products.

Advantages:

  • Best solution for cutting stainless steel tubes
  • Minimizes tube spinning and deformation
  • Improves yields, especially important when cutting expensive materials
  • Low vibration level
power_integral_sketch_69x210
Applications:
  • Thin walled (stainless) steel tubes, brass/copper
  • Suggested cutting speed: 60 – 180 m/min
  • Feed: 0,02 – 0,16 mm/tooth
  • Machines: manual, semi-automatic, automatic

Typical application examples:

Material Type of steel Dimensions (mm) Material specs. Tensile strength (N/mm2) Cutting speed (m/min) Tooth  load (mm/tooth) Cutting time (sec) Blade  life (cuts) Blade life (m2)
Tube  soft steel 89 x 2,0 S275 380 120  0,05 / 0,12 3,5 4.000 1,8
Tube  stainless 40 x 2,0 1.4301 380 42 0,03 / 0,06 5,8 9.000 2,1
Tube  stainless 50 x 1,5 1.4512 430 180 0,03 /0,06 1,6 9.000 2,1

  Available Power Integral saw blades:

Diameter (mm) Kerf (mm) Bore (mm)
315 1,8 / 1,2 32
315 2,5 / 1,8 32
350 2,5 / 1,8 32

Recommended tooth forms:

Tooth form Usage  Shape tooth form
CB Chipbreaker tooth form is most effective for tube and profile cutting, particularly with PVD coated blades. tandvorm_cb_116x12